Product ID:MOLECULAR SEIVE TYPE 13XPG
MSDS Date:02/01/1997
FSC:6850
NIIN:01-112-6490
MSDS Number: CGLTV

UOP INC

25 E ALGONQUIN RD
DES PLAINES, IL 60017-5017
US

Emergency Phone: 708-391-2123/800-424-9300(CHEMTREC)

Info Phone: 708-391-2123/FAX 708-391-2953

Cage: 02QC3

UOP LLC

DES PLAINES, IL 60017-5017 US

Telephone: 847-391-2953

Cage: 02QC3

SILICA, AMORPHOUS (FUMED)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <60%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

ALPHA-ALUMINA (ALUMINUM OXIDE) (SARA 313)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: <40%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

SODIUM OXIDE

CAS: 1313-59-3

Fraction By Weight: <20%

LD50 LC50 Mixture:SIMILAR COMPOSITION LD50 ORAL,RAT >5G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:UPON CONTACT WITH MOISTURE (SKIN &
EYES) A HIGH TEMPERATURE OF REACTION OCCURS, CAUSING BURNS. IF
SWALLOWED THE CONTACT WITH MOITSURE WILL CAUSE A RINSE IN
TEMPERATURE POSSIBLY CAUSING BURNS. INHALATI ON OF DUST MAY CAUSE
IRRITATION OF RESPIRATORY TRACT.
Explanation of Carcinogenicity:PER MSDS:SILICON OXIDE NOT CLASS AS
HUMAN CARC (GRP 3):IARC. NTP/OSHA:PROD NOR COMPONENTS
CLASSIFIED/REG.
Effects of Overexposure:SKIN-IRRITATION, THERMAL BURN. EYE-IRRITATION,
TEARING, REDDENING. EYE-DISCOMFORT, IRRITATION.
INGESTED/INHALED-BURNS TO MOIST BODY TISSUES IF CONTACT PROLONGED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
TARGET ORGANS:PROLONGED/REPEATED EXPOSURE MAY CAUSE LUNG INJURY.

First Aid:EYES-FLUSH WITH WATER FOR 15 MINUTES, HOLD LIDS OPEN. GET
MEDICAL ATTENTION. SKIN-REMOVE CONTAMINATED CLOTHES. WASH WITH SOAP
& WATER. SEEK MEDICAL ATTENTION IF SYMPTOMS PERSIST. INHALED-REMOVE
TO FRE SH AIR. IF RESPIRATORY PROBLEMS DEVELOP, SEEK MEDICAL
ATTENTION. INGESTED-IF CONSCIOUS, DRINK AT LEAST 2 GLASSES WATER.
SEEK MEDICAL ATTENTION.

Flash Point:NOT COMBUSTIBLE
Extinguishing Media:UNUSED MATERIAL WILL NOT BURN. USE MEDIA
APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:USED MATERIAL MAY CONTAIN PRODUCTS OF
HAZARDOUS NATURE. USER OF PRODUCT MUST ID HAZARD OF RETAINED
MATERIAL & INFORM FIRE FIGHTERS OF THESE HAZARDS.
Unusual Fire/Explosion Hazard:USED MATERIAL MAY CONTAIN PRODUCTS OF
HAZARDOUS NATURE. USER OF PRODUCT MUST ID HAZARD OF RETAINED
MATERIAL & INFORM FIRE FIGHTERS OF THESE HAZARDS.

Spill Release Procedures:SWEEP OR VACUUM SPILLED PRODUCT INTO
APPROPRIATE CONTAINER (DO NOT USE A VACUUM IF PRODUCT HAS CONTACTED
A HYDROCARBON). PRODUCT SHOULD BE DISPOSED OF IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGUL ATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE IN A
TIGHTLY CLOSED, PROPERLY LABELED CONTAINER.
Other Precautions:A COPY OF UOP'S BOOKLET, "PRECAUTIONS AND SAFE
PRACTICES FOR HANDLING MOLECULAR SEIVES IN PROCESS UNITS", M1001,
CAN BE OBTAINED FROM YOUR UOP REPRESENTATIVE AT NO COST.

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR EMERGENCY OCCURS, USE NIOSH/MSHA-APPROVED RESPIRATOR WITH
ORGANIC VAPOR CARTRIDGE OR SCBA OR SUPPLIED-AIR RESPIRATOR. USE IAW
29 CFR 1910.134.
Ventilation:WHERE NATURAL VENTILATION IS INADEQUATE USE MECHANICAL
VENTILATION OR OTHER ENGINEERING OR ADMINISTRATIVE CONTROLS.
Protective Gloves:USE GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

HCC:V7
Spec Gravity:1.1 PC, 2.1 CRY
pH:8-11
Solubility in Water:NOT AVAILABLE
Appearance and Odor:ODORLESS TAN PELLETS OR BEADS. NO ODOR.

Stability Indicator/Materials to Avoid:YES
SUDDEN CONTACT WITH HIGH CONCENTRATION OF CHEMICALS HAVING HIGH HEATS
OF ADSORPTION SUCH AS OLEFINS, HCL, ETC.
Stability Condition to Avoid:ADDITION OF MOISTURE (WATER) CAN CAUSE
RISE IN TEMPERATURE FROM HEAT OF ADSORPTION. SKIN CONTACT MIGHT
RESULT IN BURNS.
Hazardous Decomposition Products:THE PRODUCT ITSELF DOES NOT READILY
DECOMPOSE UNLESS SUBJECT TO EXTREME TEMPERATURE OR CHEMICAL
CONDITIONS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE ANY PRODUCT, CONTAINER OR LINER IN AN
ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE WITH
APPLICABLE GOVERNMENTAL REGULATIONS. THE PRODUCT (UNUSED) IS NOT
LISTED BY GENERIC OR TRADENAME IN THE US EPA RCRA REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.